LEGO 11388 Venetian Neighbourhood in a mirror acrylic display case with a black brushed base and a UV-printed Venetian canal background

LEGO 11388 Venetian Neighbourhood Display Case: Fitting 63 cm of Venice

Every large LEGO set eventually becomes a furniture problem. This one is a shelving problem, and the difference is worth understanding before you spend anything. The Venetian Neighbourhood went on sale to LEGO Insiders on 1 November 2026 and to everyone on the 4th: 5,682 pieces, seventeen minifigures, and at 63 cm wide, 31 cm deep and 48 cm tall it is the first big Icons set in years whose depth actually fits inside a cabinet instead of forcing you to clear a desk. Then the height ruins it — a standard shelf gap is 30 to 36 cm, and this model is 48.

LEGO 11388 Venetian Neighbourhood — Mirror Acrylic Display Case

$180 – $250 · 10 configurations

Inner size: 70 × 40 × 50 cm  ·  Model: 63 × 31 × 48 cm

Options: Black brushed · Wood grain · Ring light + sliding door · Solid wood ring light · Alloy frame · Printed background

FREE WORLDWIDE SHIPPING  no minimum — this case ships free at $180

Buy now →   Custom size — instant price

The short answer: the LEGO 11388 needs at least 70 × 40 × 50 cm of clear internal space. The model is 63 cm wide, 31 cm deep and 48 cm tall, which leaves 3.5 cm at each end, 4.5 cm at each side and just 2 cm above the clock tower. That last number is the one that decides how you display it.

LEGO 11388 Venetian Neighbourhood in a mirror display case with a 2 cm wood grain base and a UV-printed Venetian canal background

Wood grain base  ·  printed background

from $190

  • A 2 cm wood grain base — at 70 cm the base is what carries the model, not the panels
  • A free mirror floor sheet included with every case
  • A UV-cured printed backdrop — a Venetian canal behind a Venetian canal, which is the option that makes this diorama read as a place rather than a model
  • 3 mm thickened acrylic on every case we make, top to bottom of the store
LEGO 11388 Venetian Neighbourhood display case in solid wood with a ring light in the top panel and a printed background

Solid wood  ·  ring light

from $230

  • A white LED ring set into the top panel — and because it sits inside the ceiling panel, it does not eat into the 2 cm of headroom
  • A sliding door, which matters more here than usual (see the section on moving parts below)
  • Link several cases together and run the whole row from one switch
  • Powered by a standard USB port — no proprietary adapter to lose

LEGO 11388 Venetian Neighbourhood built and displayed with all seventeen minifigures lined up along the front of the canal

The diorama as built, all seventeen minifigures along the canal edge. This is the arrangement almost everyone tries first, and it is also the one that hides the gondola. Photo: Scoparius collector.

What size display case does the LEGO 11388 need?

LEGO publishes the model at 63 cm wide, 31 cm deep and 48 cm tall — note that LEGO lists depth second here, not length, because this build is not a long object. Our case measures as follows:

Measurement LEGO official model Our case (inner) Clearance
Width  (facade to facade) 63 cm 70 cm 3.5 cm each end
Depth  (canal edge to back wall) 31 cm 40 cm 4.5 cm each side
Height  (clock tower finial) 48 cm 50 cm only 2 cm

All three figures are inner dimensions — the clear space inside the case, measured wall to wall. The 3 mm acrylic panels and the raised 2 cm base sit outside this measurement. If the case goes on a shelf with a fixed overhead, add the base height on top of the 50 cm.

Two centimetres above the clock tower

The astronomical clock tower is the highest point of the build, and it is the reason our case is 50 cm inside rather than the 52 or 55 cm a case this size would normally get. Two centimetres of headroom is enough — the model never touches the top panel — but it is not enough to be careless with, and it changes three practical things.

  • Do not stack lighting on the ceiling. Our ring light is recessed into the top panel, so it costs you nothing vertically. An aftermarket LED strip glued to the inside of the roof will eat most of the 2 cm and, worse, will sit directly over a delicate finial.
  • Do not raise the base. If you put a display turntable, a felt pad or a brick-built plinth under the diorama, you are spending headroom you do not have. The mirror floor sheet that comes with the case is 1 mm, not 10.
  • Check the shelf above, not just the shelf below. A 50 cm case needs 50 cm of clear air. Bookcase shelves are drilled at fixed intervals, and the gap you measured between two shelves is not the gap you get once the case has a 2 cm base under it.

31 cm deep is the number working in your favour

Most big display sets are disqualified by depth before anything else. A standard bookcase is built 28–35 cm deep, because books are. The Executor's case is 55 cm and simply cannot go inside one; the Minas Tirith case is 40 cm and only just clears. At 31 cm, the Venetian Neighbourhood is the rare large model that will actually sit on a normal shelf — provided the shelf is tall enough.

So the usual advice inverts. Do not measure the depth first. Measure the height between shelves. If you have a 55 cm gap, this model and its case will drop straight in and look like they were designed for the furniture. If you have the standard 32 cm gap, no amount of measuring depth will save you, and the case belongs on top of the unit, on a sideboard, or on a wall shelf rated for the combined weight of the model and the case.

Seventeen minifigures and one canal

The set ships with seventeen minifigures — gondoliers, musicians, tourists, a glassblower and two carnival figures in masks — and LEGO photographs them lined up along the canal edge, because that is what makes the box art look alive. Inside a case, that arrangement has a cost: a row of figures standing at the waterline is a row of figures standing in front of the gondola, the bridge and the whole reason you bought a diorama.

You have 40 cm of internal depth to work with and the build only uses 31, which leaves a genuine strip of floor in front of the canal. Three arrangements that work better than the box photo:

  • Stagger them in two rows. Front row seated or shorter figures, back row standing, offset so no one is directly behind anyone. Seventeen figures fit in a 63 cm span at roughly 3.7 cm each — but only if you stop lining them up shoulder to shoulder.
  • Use the architecture. The balcony, the bridge parapet and the workshop steps are all load-bearing surfaces at minifigure height. Putting four or five figures up there and the rest at street level is what the set is actually designed for.
  • Leave the gondola clear. It is the only object in the build that reads as movement. If you cannot see it from the front, the diorama looks like a static street instead of a canal.

Everything that moves, and what a case does to it

This is the part that rarely gets mentioned in size guides, and it is the reason to think about the door before the base. The 11388 has an unusual number of working parts for a display set:

  • The astronomical clock. A knob on the side of the tower turns the calendar dial. It is on the outside of the building, which means it is reachable only if the case opens on that side — and it is at about 35 cm height, roughly where a sliding panel passes.
  • The street piano. A 3D-printed element, which is still rare in a LEGO set. Turn the flower vase on top and it plays real notes. It is also the most fragile piece in the build: printed parts are not moulded ABS, and they do not enjoy being knocked.
  • Removable roofs and floors. Every building lifts apart to show the interior — the glassblowing workshop in particular. Inside a sealed case this is a feature you will use twice: once when you install the model, once when you sell it.
  • Two separable base sections. The diorama splits in half so you can re-angle it for a narrower space. Our case is sized for the full 63 cm span; if you plan to display the halves apart, you want two smaller custom cases instead of one wide one.

None of this argues against a case — dust on a 5,682-piece build with a canal is a much bigger problem than a knob you can only reach with the door open. It argues for choosing the sliding door configuration over a plain base, because a sliding panel lets you reach the clock side and the piano without lifting the whole cover off.

Base, lighting and the printed background

Every configuration shares the same structure: 3 mm acrylic panels, a mirror floor sheet, a raised 2 cm base and tool-free assembly. What changes is the base finish, the lighting and the backdrop.

Assembly is simple: the panels click together by hand on the Snap-Fit connectors — no extra tools and no glue.

Base finish

  • Black brushed base — the default. It reads as equipment, and against the pale stone and terracotta of the Venetian facades it gives the whole scene a hard edge to sit on.
  • Wood grain base — warmer, and the better match for this particular set. Venice is timber piles under stone; a wood base picks up the bridge deck, the gondola and the shutters, and stops the case looking like a museum vitrine in a living room.

Lighting

  • Ring light + sliding door — a white LED ring recessed into the top panel, a USB port and sliding doors. Several cases can be connected and switched on together. Because the ring sits in the ceiling panel rather than hanging below it, it does not touch the 2 cm of headroom above the clock tower.
  • Solid wood ring light — the same lighting under a 12 mm solid wood top frame instead of aluminium. At this scale the frame is 70 cm wide; wood looks like furniture, aluminium looks like a light box.
  • Free cable pass-through, drilled at any position — if you plan to add lights, we drill the cable hole before the case ships — back panel, side or base, with a clean factory edge — at no extra charge. Just add a note at checkout telling us where you want it. The lead then exits where it should instead of being draped over the top edge — and you never hand-drill 3 mm acrylic at home.

Printed background

The printed background option adds a themed image printed directly onto the back panel — 3 mm thick and UV-cured, so it resists fading in daylight. This set is unusual in that the backdrop is not decoration, it is continuity: the build stops at 31 cm of depth, and a Venetian canal view behind it carries the eye out to a horizon the model cannot provide. Skip it and you get a very good model against a grey wall. Take it and the diorama looks like a window.

Close-up of the LEGO 11388 Venetian Neighbourhood arched bridge with a gondola passing underneath and minifigures on the canal bank

The arched bridge and the gondola beneath it. The little blue-and-white mooring posts are the detail that shows this is Venice and not a generic canal town — and they sit exactly at the waterline, where dust settles first. Photo: Scoparius collector.

Narrower, deeper, or split into two?

We build to your measurements. Enter the dimensions you need and the price updates as you type — you don't have to email us and wait for an answer.

  • Live pricing — the price recalculates instantly as you change size, base or lighting
  • Up to 240 cm on the longest side — the standard 70 cm sits well inside that, with room to go to 55 cm depth if you want the case to clear a specific shelf
  • Two halves, two cases — if you plan to split the diorama, order two cases sized to each section instead of one wide one
  • Worldwide shipping — factory direct, so there's no middleman markup in the price

Customize your size →

LEGO 11388 Venetian Neighbourhood displayed on the middle shelf of a lit collector cabinet alongside other LEGO sets

On a shelf in a working collection. The lit shelf above is 34 cm away — close enough that the top of the clock tower would touch it with a case on, which is exactly the measurement worth taking before you order. Photo: Scoparius collector.

Frequently asked questions

What size display case does the LEGO 11388 need?

At least 70 × 40 × 50 cm of clear internal space. The model is 63 cm wide, 31 cm deep and 48 cm tall, so this leaves 3.5 cm at each end, 4.5 cm at each side and 2 cm above the clock tower — the tightest of the three.

Will the LEGO 11388 fit in a bookcase?

Depth, yes — at 31 cm the model is shallower than most bookcases. Height, usually no: standard shelf gaps are 30–36 cm and the model alone is 48 cm tall. Measure the gap between shelves, not the width of the unit, and remember the case adds a 2 cm base.

Why is there only 2 cm of headroom?

Because the clock tower finial is the highest point and the tower is the tallest element in the build. We could make the case 55 cm tall, but every extra centimetre is a centimetre that has to fit under your shelf. Two centimetres clears the finial and keeps the case in the same height class as the model.

Can all seventeen minifigures go inside the case?

Yes, and there is 9 cm of spare floor depth in front of the canal to place them. Seventeen figures standing shoulder to shoulder across 63 cm is about 3.7 cm each, which works but hides the gondola and the bridge. Stagger them in two rows or move four or five onto the balcony and bridge parapet.

Should I choose the sliding door?

If you want to use the moving parts, yes. The astronomical clock knob is on the outside of the tower at roughly 35 cm height, and the 3D-printed piano sits at street level; both are reachable through a sliding panel and awkward to reach with a lift-off cover at this size. It is also how you clean the canal without moving the build.

Can I display the two halves separately?

The diorama splits into two base sections, so yes — but our standard case is sized for the full 63 cm span. If you want the halves apart, order two smaller custom cases sized to each section instead of one wide case with an empty middle.

Is the LEGO set included with the display case?

No. Every case is sold on its own — the LEGO 11388 set is not included. The case ships flat as separate 3 mm acrylic panels that you click together with the Snap-Fit connectors — no glue, no tools.

Is the case hard to assemble?

No. The panels click together by hand on the Snap-Fit connectors, with no extra tools and no glue. A 70 cm panel is manageable alone; the only part that needs care is seating the top panel squarely so the ring light, if you chose it, sits level.

Can you drill a hole for the lighting cable?

Yes, and it is free. We drill a cable pass-through at any position — back panel, side or base — before the case ships, with a clean factory edge, at no extra charge. Just add a note at checkout telling us the position. It works with our ring light, our lighting kit, or a third-party one.

What if my build is not exactly 63 cm?

Then order to your own measurement. The custom option prices live as you type and goes up to 240 cm on the longest side. This matters more than usual with the 11388, because re-arranging the two base sections changes the footprint — a re-angled layout can be 10 cm wider or narrower than the box photo.

Before you order

  • Free worldwide shipping, no minimum. This case starts at $180, so shipping is on us. Processing 1–2 days, delivery 7–25 days.
  • 30-day returns from the day you receive your order.
  • Factory direct, lowest price online. Every case is cut, polished and finished in our own workshop — no middleman markup, no reseller margin, and quality checked against competitors charging more for the same size.
  • Built to spec: 3 mm acrylic  ·  mirror floor sheet  ·  raised 2 cm base  ·  tool-free assembly  ·  2 cm clearance above the clock tower
  • Display case only. The LEGO set is not included.

Buy the 70 × 40 × 50 cm case →

Prices and configurations checked 31 October 2026.

Need a different size?

Join our collector community

Back to blog

Leave a comment