LEGO 11390 Shenron and Goku in a mirror acrylic display case with black brushed base and printed background

LEGO 11390 Shenron & Goku Display Case: Exact Size, Clearance and Custom Fit

Shenron is a coiled dragon, not a tower and not a vehicle — and that one fact breaks the way most people shop for a display case. He rises in a spiral from the seven Dragon Balls, so the widest part of the model is the circle he coils into, not the footprint he stands on. LEGO lists him at 32 cm tall, 26 cm wide and 24 cm deep. Look at those last two numbers again: he is wider than he is deep.

LEGO 11390 Dragon Ball: Shenron & Goku — Mirror Acrylic Display Case

$70 – $110 · 10 configurations

Inner size: 30 × 30 × 35 cm  ·  Model: 26 × 24 × 32 cm

Options: Black brushed · Wood grain · Ring light · Solid wood ring light · Alloy frame · Printed background

FREE SHIPPING ON ORDERS OVER $80  this case starts at $70 — add any second item and shipping is on us

Buy now →   Custom size — instant price

LEGO 11390 Shenron and Goku in a mirror acrylic display case with a 2 cm black brushed base and a printed background

Black brushed base  ·  printed background

from $80

  • A 2 cm high black brushed base — the green scales and the gold underbelly read hard against it
  • A free mirror floor sheet included with every case
  • A high-definition printed background, UV cured so the colour holds instead of fading in daylight
  • 3 mm thickened acrylic on every case we make — the same panel thickness across the whole store, top to bottom
LEGO 11390 Shenron display case with the white LED ring light in the top panel switched on and sliding doors

Ring light  ·  sliding doors

from $90

  • A white LED ring set into the top panel — it throws light down the inside of the coils, which is where a spiral figure goes dark on a shelf
  • Left and right sliding doors — they slide sideways instead of swinging out, so nothing flips into the shelf space in front
  • Link several cases together and run the whole row from one switch
  • Powered by a standard USB port — no proprietary adapter to lose

LEGO Icons 11390 Dragon Ball Shenron with Kid Goku on the Kintoun cloud, coiled above the seven Dragon Balls

Shenron as built: 1,764 pieces, no stickers anywhere — every scale and scale ridge is a printed element. Kid Goku rides the Kintoun and detaches, so you can re-stage the scene. Photo: Scoparius collector.

What size display case does the LEGO 11390 Shenron need?

LEGO publishes the model at 32 cm high, 26 cm wide and 24 cm long. Our case measures as follows:

Measurement LEGO official model Our case (inner) Clearance per side
Height 32 cm 35 cm 1.5 cm
Width  (left–right) 26 cm 30 cm 2 cm
Depth  (LEGO calls this “length”) 24 cm 30 cm 3 cm

All three figures are inner dimensions — the clear space inside the case, measured wall to wall. The 3 mm acrylic panels and the raised 2 cm base sit outside this measurement. If the case is going on a shelf with a fixed overhead, allow for the base height on top of the 35 cm.

Why this case is wider than it is deep

Almost every set we make a case for is longest front to back — a car, a train, a building on a rectangular plate. Shenron is not. He coils, so his silhouette is close to a circle standing on edge, and a circle has no long axis to hide the extra room in:

  • The width is set by the coil, not the base. At his standard pose the outermost scale ridge sits 26 cm across. This is the number people miss, because shopping habits push you to check height and length and stop there. At 2 cm per side the case clears the coil without a gap wide enough to make him look lost.
  • Depth gets the most room of the three. The head leans forward out of the spiral and the tail sweeps back behind it, so the front-to-back silhouette is the one that moves most when you re-pose him — 3 cm per side is what keeps a raised head or a swung-out claw from pushing against the back panel.
  • Height is the tightest, and that is on purpose. The 32 cm figure already includes the horn tips at the very top, and the case drops straight down over him from above. Too much headroom and the light ring sits far away from the figure, which flattens the scales instead of raking across them.

Three things the official dimensions don't tell you

LEGO's numbers describe the model in one fixed pose, measured at its widest points. For a poseable, coiled figure that leaves three gaps worth knowing about before you buy any case from anyone:

  • 1. The head and the claws are poseable. LEGO states that Shenron's head and claws can be repositioned. Every published dimension, including ours, assumes the standard stance. Raise the head or open a claw outward and you are past the published depth within a couple of centimetres. Set him the way you actually want him, then measure — that is the measurement worth ordering against.
  • 2. The base is a disc, and the Dragon Balls are built into it. This is not a flat rectangular plate like a car chassis. All seven Dragon Balls sit around the perimeter of a round black base carrying the original manga logo, which means the footprint is wider than the dragon's body alone would suggest — and a case with a snug rectangular base has nowhere for that disc to sit.
  • 3. Kid Goku detaches, so the scene is yours to compose. The minifigure lifts off the Kintoun cloud and can be re-staged anywhere inside the case. Put him higher and to the side of the coil and the model occupies a taller, wider envelope than the box photo shows. If you plan to do that, size for the composition you want, not the one on the front of the LEGO box.

None of this is a reason to over-buy. It is a reason to measure your own build — which is exactly what the custom option below is for.

Base, lighting and the printed background

Every configuration shares the same structure: 3 mm acrylic panels, a mirror floor sheet, a raised 2 cm base and tool-free assembly. What changes is the base finish, the lighting and the backdrop.

Base finish

  • Black brushed base — the default for a reason here. Shenron is saturated green with a cream belly and red trim; a dark base keeps those three from fighting each other.
  • Wood grain base — warmer, and the one that looks less like equipment in a living room.

Lighting

  • Ring light, sliding door — an LED strip runs around the top panel with a USB port, and the door slides rather than hinges. Several cases can be connected in series and switched on together. For a figure that coils inward, top-down light is the option that actually reaches the inside of the spiral.
  • Solid wood ring light — the same lighting inside a 12 mm solid wood frame. Heavier, warmer, more furniture than accessory.
  • Alloy frame + ring light — slim aluminium profile, the most minimal of the three.
  • LEGO lighting kit + RC (separate add-on, $55) — lights that go inside the build itself, remote controlled. The one for people who want Shenron lit from within rather than lit from above.

Printed background

The printed background option adds a themed image printed directly onto the back panel — 3 mm thick and UV-cured, so it resists fading in daylight. It matters more on this set than on most. Shenron is a figure designed to be seen against a summoning sky, and a plain back panel turns him into a green object on a shelf. With a backdrop the coil reads as depth instead of as bulk.

Posed him your way? Order to your own measurement.

We build to your measurements. Enter the dimensions you need and the price updates as you type — you don't have to email us and wait for an answer.

  • Live pricing — the price recalculates instantly as you change size, base or lighting
  • Up to 240 cm on the longest side — if you want Shenron and the whole Dragon Ball shelf under one cover, this is how you get it
  • Worldwide shipping — factory direct, so there's no middleman markup in the price

Customize your size →

LEGO 11390 Shenron standing in the open, showing how dust and side light reach the model without a display case

The same model standing in the open. This is the version that collects dust along every scale ridge, and the light coming from one side is why the coil on the far side disappears. A case does two jobs at once: it stops the dust and it puts a light source above the build instead of beside it.

Before you order

  • Free shipping on orders over $80. This case starts at $70, so add any second case — or any other item — and shipping is free. Orders under $80 ship for $20. Processing 1–2 days, delivery 7–25 days.
  • 30-day returns from the day you receive your order.
  • Factory direct. Every case is cut, bent and assembled in our own workshop — no middleman markup, no reseller margin.
  • Built to spec: 3 mm acrylic  ·  mirror floor sheet  ·  raised 2 cm base  ·  tool-free assembly
  • Display case only. The LEGO set is not included.

Need a different size?

Join our collector community

Back to blog

Leave a comment